Overview
The GE DS200CPCAG1ABB is a contactor/relay interface card used in GE Mark V turbine control systems. It provides relay driving capability, contactor status indication, and wiring termination for field control signals.
General Information
Part Number: DS200CPCAG1ABB
Manufacturer: GE (General Electric)
Series: Mark V (DS200 series)
Type: Contactor Indicator / Relay Interface Card
Mounting: Installed in Mark V control cabinet card rack
Technology: PCB with relay, terminal blocks, plug connectors, isolation circuitry
Power Specifications
Supply Voltage: 115 V DC relay coil (board supply via Mark V backplane)
Power Consumption: Low-power logic and driver circuitry
Input Source: Powered from Mark V rack/backplane
Protection: Isolation, filtering, surge suppression
Indicators: LED indicators for relay and status
Communication & Interface
Connectors: 1× 12-pin plug, 2× 2-pin plugs, 4× terminal blocks
Relay Function: Drives 24 V DC / 15 A relay loads
Signal Conditioning: Rectifier, filters, protective circuits
Diagnostics: On-board LED indication and relay feedback
I/O & Channels
Relay Output: 1 plug-in power relay
Status Inputs: Contactor auxiliary/status feedback
External Load: Supports 24 V DC, 15 A loads via relay
Environmental
Operating Environment: Industrial control cabinet
Humidity: Standard industrial non-condensing
Board Coating: Standard protective PCB coating
Protection: Enclosure-protected (installed in Mark V cabinet)
Dimensions & Weight
Dimensions (L × W × H): 263 × 138 × 88 mm
Weight: ~0.454 kg
Authentic brand-new products, 24/7 online support, stock available, rapid quotes provided.